Readers ask: How To Lay Tile Around Toilet?

Readers ask: How To Lay Tile Around Toilet?

Do you tile around a toilet or under it?

To install tile properly around the toilet, you need to affix it to the floor under the fixture. Because toilets sit on top of tile, any rough cuts are hidden, making it easy to achieve the appearance of tile that has been custom-cut for your bathroom.

Can you install tile around a toilet?

Tiling around a toilet to save a few dollars in labor will leave you with an unprofessional installation, and your guests will notice. It is almost impossible to cut flooring, especially ceramic tile or wood, precise enough to fit snugly around a toilet base.

Does tile go under toilet flange?

The toilet flange needs to be on top of the finished floor. Meaning the bottom edge of the flange needs to be on the same plane as the toilet. So if your toilet sits on the tile, the flange needs to be on top of the tile too.

Should I caulk around the toilet?

Caulk prevents a fouling area. If mop water, bathtub water, or a less pleasant “bathroom liquid” gets underneath the toilet, there is no way to clean it up. Caulking around the base of the toilet will prevent this from happening.

You might be interested:  FAQ: How To Repair A Ceramic Tile Floor?

How long after tiling can I install toilet?

After you lay ceramic floor tiles, the grout inside the joints between the individual tiles must be allowed to cure. Generally, it’s safest to wait at least 48 but ideally 72 hours after installing ceramic tiles before installing a toilet.

Can I install toilet before grout?

Typically, a tile floor is completed and grouted prior to the toilet being installed or replaced. If the toilet is already in place before grouting, you can grout between the toilet base and the tile.

How high should toilet flange be above tile floor?

Optimum flange height to aim for is 1/4 inch above the finished floor. This typically allows for almost any type of wax ring to be used and still ensure a good seal. If you recently tiled or changed the bathroom flooring, the flange height is likely less than optimal.

How do you install a toilet when the flange is too high?

Grout is an excellent tool to use when the flange is too high. To use grout to fix your flange:

  1. Start by mixing your grout.
  2. Get your toilet in place and set your toilet on four rubber shims.
  3. Take your mixed grout and pack it into the gap.
  4. Wait 24-hours before the grout to dry.
  5. Once dried, remove the shims.

How soon can you put grout on tile?

24 to 48 Hours You should wait at least 24 hours before grouting the tiles. You may notice that the edges of the thinset or the thinset showing through the grout lines looks dry.

Leave a Reply

Your email address will not be published. Required fields are marked *