FAQ: How Do I Clean Travertine Tile?

FAQ: How Do I Clean Travertine Tile?

What is the best cleaner for travertine?

It’s ideal to use a soapless cleaner, as soap can often leave streaks and film behind, which may be noticeable on polish-finished travertine stone. Ideally you should use mild, phosphate-free, biodegradable liquid dishwashing soaps or powders or stone soaps to clean your travertine tile.

Can you use vinegar on travertine?

Never use vinegar on travertine tiles as it is and acid and will cause damage to the surface of the tile and will make them susceptible to stains and prematurely age the travertine floors and tiles.

How do you clean unfilled travertine tile?

Travertine cleaning and maintenance is simple. You’ll need a neutral cleaner (pH 7) and clean water. If using a soap cleaner, it’s recommended to use a rinse-free one so you’re not left with streaks. This will also create a protective film over the stone and help deepen the patina.

Can you use Swiffer wet on travertine floors?

To keep natural stone clean, fight dirty. A “ Swiffer ” type dry mop is fine, but stay away from the “ wet ” attachments, as the chemicals in them can damage natural stone.

You might be interested:  Often asked: How To Do Wall Tile In Bathroom?

Can I use baking soda to clean travertine?

Combine equal parts water and baking soda with just a splash of your regular cleaning agent. Mix until pasty and scrub into the travertine tile or paver you’d like to clean. Then, cover the surface area of the stain with a thick coating of the mix and allow it to sit for 15 to 30 minutes.

Can I use Dawn on travertine?

​Simply using a good mop that is damp with water will give your floors a nice, safe shine. If you have any issues with a stain or sticky residue on your travertine surfaces, you can use a mild dish soap such as Dawn to help clean your travertine floor.

Can I use Simple Green on travertine?

Simple Green Granite & Stone Polish is safe for use on granite, marble, travertine, limestone, porcelain, ceramic, quartz, Corian®*, Silestone®*, and other natural and engineered stone surfaces.

How do professionals clean travertine floors?


  1. Sweep or Vacuum the Floor. Sweep or vacuum the floor to eliminate small particles of dirt and grit.
  2. Mop the Floor. Apply a small amount of plain warm water to the floor with a sponge or mop that is nearly wrung dry so that the travertine surface gets just barely damp.
  3. Disinfect the Floor.
  4. Clean the Grout Lines.

Can you clean travertine with hydrogen peroxide?

To kill off mold and mildew and keep your investment looking its best, travertine can be cleaned with a peroxide -based product like Oxiclean, which will not harm the polish on your travertine. Remember, hydrogen peroxide can bleach fabric, so, like bleach, watch your clothes and linens.

You might be interested:  Question: How To Remove Ceramic Tile Glue?

How do you refresh travertine tile?

  1. Step 1: Strip Excessive Material. Before you can polish a travertine floor, you have to start by deep-cleaning the built-up wax and dirt.
  2. Step 2: Steam Clean the Travertine.
  3. Step 3: Fill Cracks, Chips, and Holes.
  4. Step 4: Tape Plastic Sheeting Around Edges.
  5. Step 5: Polish the Travertine.
  6. Step 6: Tidy Up & Seal.

Can I use Pine Sol on travertine floors?

Using Pine Sol on Travertine Floors: Pine – Sol should NEVER be used on natural stone. The acidic compound of Pine – Sol will eventually dull and etch the stone. If used often enough and long enough it could permanently damage the travertine stone not to mention the sanded grout.

How do you make travertine tile shine?

Here are step-by-step instructions for making your floor shine like new.

  1. Clean the floor. It’s important to take some time to thoroughly scrub the tiles clean first.
  2. Sand down the tiles. Next, you’ll want to smooth the travertine tile with sandpaper.
  3. Buff the floor.
  4. Mop up the surface.

Can you mop travertine?

MOPPING. DO: The best and most ideal way to clean your travertine floors and to keep them looking neat and pristine is by mopping them regularly. Mopping can be done with warm, plain water or a cleaning product can be added to the water to enhance the quality of mopping.

Can you use Windex on travertine?

Which, naturally leads us to the inevitable problem that most cleansers are acidic and will eat through your sealant and etch your beautiful stone. So, the occasional reach for good old Windex, 409, or one of their cronies is probably okay, but on a regular basis, it will produce etching.

You might be interested:  FAQ: How Do I Tile A Kitchen Wall?

Can you use CLR on travertine tile?

Can you use CLR on travertine tile? CLR is a potent acid that works by dissolving the upper surface of all calcium-based stone, including travertine and marble that has been skillfully honed and buffed during the manufacturing process.

Leave a Reply

Your email address will not be published. Required fields are marked *